A Simple Plan For Researching Resources

4 Stages To Do Hardwood Floor Refinishing Correctly

When considering hardwood floor refinishing, homeowners have to know that along with planning and patience and skill, they ought to have specialized equipment as well. Out of all the home improvement projects that homeowners can undertake, this one is something that requires research, knowledge and time. You’ll go through many steps or stages that include preparing, evaluating, sanding as well as sealing your hardwood floors.

In any of the said stages or steps, even a slight touch of error is enough to cause problems that can last for a long time. Yes, you can refinish the entire hardwood flooring alone but, it is wise that you get some help at some parts. It will take around 1 to 3 weeks to carry out refinishing for this kind of flooring.

Step 1. Checking the hardwood floor – it is your job to determine whether or not the hardwood floor planks is a laborious process. You have to assess if the floor suffered from water, pet urine or spills. You may pull up one threshold of the door in order to see if the boards are so thin to be sanded. You additionally need to find out if the last sealant was varnish, wax or polyurethane. You have to examine the hardwood flooring to be able to see if they have deep gouges or dramatic wear patters.
A Quick Overlook of Options – Your Cheatsheet

Step 2. Preparing the flooring – you must prepare the flooring first before you do hardwood floor refinishing. If most of the hardwood planks don’t have scratches or holes, are at least 3/4 inches thick and have same amount of sealant, then you’re all set to start with the preparation.
Floors – My Most Valuable Advice

First thing that you’ve got to do is clean the whole floor area. It is vital as well to file holes from nails, staples or scrapes. Moreover, you will have to pull up the baseboards and the thresholds too. Even if one of the floors does not look good, still you need to do all the flooring to maintain consistency.

Step 3. Sanding – probably, this is the most daunting and demanding step that you will ever do. You need to rent a drum sander equipment, this is loud to use and you’ve got to roll it to the entire hardwood flooring 3x to be able to peel off the top layer of the finish.

Step 4. Staining and sealing – just before you start with this step, you must ensure that every bit of sawdust is gone so it doesn’t contaminate the sealing and staining applications. After staining the floors, you have to seal it with thin layer of sealant to ensure that the stain is completely dry before applying it.